>

Wheel FAQ's
 

  1. What are the Advantages of Bogart racing wheels?

  2. Why are Bogart Racing Wheels not intended for street use?

  3. How do I measure backspace and wheel width?

  4. Can Bogart Racing Wheels build a wheel for my car?

  5. Will Bogart Racing Wheels clear my brakes??

  6. Can Bogart Racing Wheels repair my wheels if they get damaged?

  7. Why can't my wheels ship in 1-2 days?

  8. How long is the warranty on Bogart Racing Wheels?

  9. What happens if I get my wheels and they don't fit?

  10. Do I need to use special lug nuts?

  11. Do I have to use tubes in my wheels?

  12. How do I care for the finish on Bogart Racing Wheels?

  13. What are some safety issues I should be aware of?

     
What are the Advantages of Bogart racing wheels?

Back to top
One of the best ways to gain performance is by removing weight. Acceptable standards are for every 100 lbs of weight you remove from your car, your 1/4 mile times can improve by as much as one tenth of a second!  There are a couple of ways to facilitate this, static weight  i.e. car seat and rotating, or un-sprung, weight i.e. wheels.  Rotational or un-sprung weight has a greater effect on performance gains.  A ratio of 1:4 up to 1:8 is an accepted range.  This means that for every 1 lb of mass you remove from your wheels, it is comparable to removing 4-8 lbs of weight from your car! While every application is different, we have seen improvements by as much as 2 tenths in 5.0 liter Mustangs and Camaros and almost a full second in normally aspirated Hondas by switching to Bogart Racing Wheels.
 
Why are Bogart Racing Wheels not intended for street use? Back to top
Bogart Racing Wheels are built for a specific application (racing), we remove as much mass (weight) as possible, while maintaining enough structural integrity to be sure that Bogart Racing Wheels will survive through their intended purpose.   
   
How do I measure backspace and wheel width? Back to top
Please click here for a backspace diagram to show you how to measure backspace.
   
Can Bogart Racing Wheels build a wheel for my car? Back to top
Bogart Racing Wheels manufactures wheels in sizes ranging from 13" to 17" in diameter and from 2" to 20"+ wide.
   
Will Bogart Racing Wheels clear my brakes?  Back to top
Bogart Racing Wheels have been able to fit most applications. However, we still want to be sure we can fit your needs before we build your wheels. Please click here to see a diagram with the measurements we will need.
   
Can Bogart Racing Wheels repair my wheels if they get damaged? Back to top 
Bogart Racing Wheels can often repair wheels that are damaged.  Wheels may need to be checked.  Please call for more information.
   
Why can't my wheels ship in 1-2 days?  Back to top 
Bogart Racing Wheels builds custom wheels that encompass many styles, sizes and bolt patterns, it is impossible to keep all these completed wheels in stock.
   
How long is the warranty on Bogart Racing Wheels?  Back to top 
Click here for a copy of the Bogart Racing Wheel warranty.  
   
What happens if I get my wheels and they don't fit?   Back to top
When you receive your Bogart racing wheels you need to check fitment on the car before you mount tires on your wheels. If the wheels were built to your specifications and they don't fit, you may be able to return them for a 25% restocking fee (depending on size, backspace, style, etc.) However, we will not accept wheels back for any reason that has been mounted.  
   
Do I need to use special lug nuts?   Back to top 
Yes. All of our racing wheels require a specific type of lug nut. They are available from us or or other aftermarket sources.  Some applications require custom length lugs. If you will be purchasing them from an aftermarket source other than Bogart Racing Wheels, be sure to ask us what size and style lug nut you will need.
   
Do I have to use tubes in my wheels?  Back to top
No. While some will choose to use inner tubes, Bogart Racing wheels are guaranteed leak free. This allows you to not use inner tubes, again decreasing rotating, or un-sprung, weight.
   
How do I care for the finish on Bogart Racing Wheels? Back to top 
The finish on Bogart Racing Wheels is achieved from custom show polishing the aluminum halves. There is no coating on the wheel which can change the luster of the material. We recommend a fine coat of wax as you would use on your cars finish to keep the wheels free from dirt or debris.  Regular maintenance the show appearance will remain for some time. If a wheel should require polishing, there are many aluminum polishes that work well that can be purchased at your local auto-parts store
   
What are some safety issues I should be aware of? Back to top
All wheels and accessories are for racing only. They are not intended for street, road or highway use. They should not be used on race cars being towed. They are to be used only on track, courses, or strips designated for racing only. They should be used for their intended purpose (i.e. road race wheels for road racing only, drag race wheels for drag racing wheels only, etc.)  

  • Never inflate tires higher than recommended tire pressure.

  • Rim bolt torque settings are 11ft. lbs. For 5/16 inch and 5ft. lbs. For ¼ inch.

  • Never attempt to force a misaligned tire onto a wheel with high air pressure. This can lead to wheel damage, serious injury or death, and is just plain stupid.

  • Clean wheel mounting surface on the brake drum or hub.

  • File off any burrs or sharp edges. Lug nut torque settings are as follows:

    Stud 7/16" 12mm  ½"  14mm
    Ft. lbs. 55-65 70-80 75-85 85-95

  • Check torque settings on wheels often. If they have loosened, re-torque.


THIS IS JUST A PARTIAL SAFETY LIST. ALWAYS EXERCISE GOOD JUDGMENT AND COMMON SENSE WHEN USING ANY RACING COMPONENT.